CertainTeed Gutter Replacement Nationwide

CertainTeed Gutter Replacement: The Orlando Owner’s Guide

We replace CertainTeed gutters throughout Orlando, and most jobs run between $12 and $22 per linear foot installed, depending on the profile and what the existing fascia looks like once we get the old run down. That price includes removal of the failing section, new CertainTeed-matched components or OEM equivalent, hangers, sealant, and haul-away. We stock the common CertainTeed profiles and colors on our trucks, so in most Orlando neighborhoods we can replace a failed gutter section the same day we look at it.

Call (850) 303-7235

Here’s the typical way this shows up: you notice a drip line staining the soffit during one of our afternoon downpours, or you walk outside after a storm and see a gutter joint pulled apart, spilling water against the foundation. Sometimes the gutter itself is fine and the hangers have let go. Either way, the part that failed is rarely the whole system. It’s a section, a joint, or a mounting point, and that’s what we replace.

Key Takeaways:

• CertainTeed gutter replacement in Orlando typically costs $12 – $22 per linear foot installed
• We carry common CertainTeed profiles and colors on the truck for same-day section swaps
• Written price before we touch the roof, and a written guarantee on the work
• Tilehurst Roofing Orlando is an independent service provider, not affiliated with CertainTeed

Which CertainTeed Models This Applies To

CertainTeed makes several gutter profiles, and the replacement part has to match the one already on the house. Their K-style aluminum gutters come in 5-inch and 6-inch widths, and the 5-inch is what we see on the majority of Orlando homes built in the last thirty years. CertainTeed also produces a half-round profile in copper and aluminum, though it’s less common in this market outside of historic districts like Lake Eola Heights or Delaney Park, where the architectural style calls for it.

How to identify what you have: run a tape measure across the top opening of the gutter. Five inches means a 5-inch K-style in nearly every case. Six inches is the 6-inch K-style, which moves more water and is worth keeping if you have a steep roof or a large roof face draining to one side. The brand is usually stamped on the inside or underside of the gutter, though solar exposure in Florida can fade it over time. If the stamp is gone, the profile shape and the corner style tell us what we’re working with.

The OEM-versus-aftermarket decision matters less with gutters than with shingles. CertainTeed aluminum gutter is made to standard industry dimensions, so a quality aftermarket section in the same gauge and profile matches cleanly. What matters more is the gauge of the aluminum. CertainTeed runs .027-inch aluminum on most of their K-style line, and a thinner big-box section at .019-inch will oil-can and sag in Florida’s heat. We match the gauge, not just the profile shape.

Signs Your CertainTeed Gutter Replacement Is Failing

• Water spilling over the front edge during rain. This usually means a clogged downspout or a sagging section that has lost its pitch. The gutter can’t move water to the downspout because the fall is gone.
• Separated joints or visible gaps at the seams. CertainTeed gutters are joined with sealant and connectors. Years of Orlando heat-and-rain cycles break the sealant down, and once a joint opens, water finds it every time.
• Gutter pulling away from the fascia board. The hangers or spikes have loosened, either from rot in the fascia or from the weight of debris and standing water. This is the most common failure we see in older Orlando neighborhoods like Colonialtown, where fascia boards have decades of moisture exposure.
• Staining or streaking on the fascia and soffit. Water is getting behind the gutter or overflowing at the back edge. The drip edge may be tucked behind the gutter instead of over it, which we correct when we replace the section.
• Standing water in the gutter days after rain. That means no pitch or a blocked outlet. Standing water breeds mosquitoes, which is a real concern in Central Florida, and it adds weight the hangers were never meant to carry permanently.

Replacement Cost & What’s Included

For a typical CertainTeed 5-inch K-style section replacement in Orlando, we quote $12 to $18 per linear foot for a straight run with standard hangers. The 6-inch profile runs $16 to $22 per foot. Half-round runs higher, generally $18 to $28 per foot depending on the material and the bracket hardware. If the fascia board behind the gutter has rot, we add the cost of replacing that decking board, usually $6 to $10 per linear foot, because hanging a new gutter on rotted wood guarantees a callback.

Every quote includes removal of the old section, new hangers spaced to CertainTeed’s recommended 24-inch maximum (we run them closer on 6-inch gutter), sealant at every seam, and cleanup. You get the written price before any work starts, and the replacement carries our written guarantee. If something fails inside the guarantee window, we come back at no charge. That’s the Kingswell Way, and Greg Holloway expects his crew to honor it the same way he would if he were the one standing on the ladder.

DIY or Call Us?

Gutter work involves working from a ladder at roofline height, which is where the safety conversation starts. A 30-foot section of a second-story gutter is not a weekend project, and even first-story work goes wrong fast when a ladder is set on wet grass or uneven ground. We recommend a professional for any replacement above one story, any job involving electrical service drops near the roofline, and any situation where the fascia condition is unknown.

What you can safely do is check. Look for the symptoms above from the ground. Note where the failure is, measure the approximate run, and check for visible damage to the fascia or the soffit. That’s useful information when you call. What goes wrong with DIY gutter replacement is usually the pitch. Gutter has to fall toward the downspout at a steady quarter-inch per ten feet. Too flat and water ponds. Too steep and it looks wrong and splashes. Getting that right while balancing on a ladder, handling a 10-foot section of aluminum in the wind, and sealing joints that have to stay watertight through Florida’s rainy season is harder than it looks. We tell you the price before we touch the roof – and we mean it. If you want a number, call (850) 303-7235 and we’ll set a time to walk it with you.

FAQs