Owens Corning Roofing Company Nationwide

Owens Corning Roofing Company in Orlando: What to Know First

We’re an independent Owens Corning roofing company in Orlando, and we handle repairs, full replacements, inspections, and everything between for homes with Owens Corning shingle systems. Most repair calls get a written price within a day or two of your first call, and the work itself is usually done in a single visit. You’ll know the real dollar figure before we touch the roof, because that’s how we’ve operated since Greg Holloway started running crews here. If you own a home in Orlando with Owens Corning products and something looks wrong, call (850) 303-7235 and we’ll walk you through what you’re seeing. This page is written for owners of Owens Corning roofs, whether you’ve got a TruDefinition Duration system, an Oakridge line, or an older Supreme shingle that’s starting to show its age. You’ll find the failure patterns we see most, what repairs actually cost in this market, and how we keep your manufacturer warranty intact while fixing the real problem.

Call (850) 303-7235

How Owens Corning Products Fail – and How We Fix Them

Every shingle brand fails in its own way. Owens Corning products are well made, but we’ve been on enough Orlando roofs to know exactly what to look for, and it’s rarely what the homeowner expects. Here are the failure modes we see most often with Owens Corning systems in this climate, and how we correct each one.

• TruDefinition Duration shingles losing granule adhesion after heavy afternoon storms. Duration is a solid architectural shingle, but Orlando’s combination of intense UV exposure and sudden downpours can accelerate granule loss on roofs with poor attic ventilation. We often find the real culprit is trapped heat, not defective shingles. Our fix starts with confirming ventilation before we replace any material, because replacing shingles on a hot attic roof just sets you up for the same problem two years later.
• Oakridge shingle sealant strips failing on west-facing slopes. The Oakridge line uses a thermal sealant that needs consistent heat to bond properly. On Orlando homes where one slope gets afternoon sun and the other stays shaded by oaks, we occasionally see shingles that never fully sealed. The symptom is shingles that lift in the next wind event. Our repair is to hand-seal the affected shingles, not to tell you to wait and see. That’s a twenty-minute fix we do right away.
• Owens Corning hip and ridge cap cracking at the bend line. Ridge cap shingles take more flex than any other piece on the roof. On older Owens Corning installs around Orlando, we find cap shingles that have cracked at the fold after years of thermal expansion. The fix is replacing the cap with new matching material, and we check the underlying nails too, because a loose nail under a cracked cap is a slow leak waiting to happen.
• Underlayment failure under Owens Corning shingles on low-slope sections. On Orlando homes with flat or low-slope porch roofs, the shingles often aren’t the problem at all. The synthetic underlayment underneath has broken down from standing water, and now the decking is wet. We strip the section, inspect the decking, replace rotted wood if needed, and install new underlayment before putting the shingles back. If we just re-shingled over bad underlayment, we’d be back in six months, and so would the leak.
• Flashing failures at chimney and wall intersections on older Owens Corning roofs. This isn’t an Owens Corning defect, it’s an installation and age issue, but it’s the number one source of leaks we trace on Orlando homes with Owens Corning shingles. The shingles are fine; the metal flashing has corroded or pulled away. We replace the flashing, not the shingles, which saves you thousands compared to a full reroof, and we do it without voiding any remaining manufacturer coverage.

Our Owens Corning Roofing Company Process

Here’s what happens when you call us about your Owens Corning roof in Orlando, from the first phone call to the last nail. No surprises, no vague updates.

1. 1
   You call, a live person answers. That’s not a slogan. We answer the phone at (850) 303-7235 around the clock, and the person who picks up will ask the right questions, not just take a message.
2. 2
   Greg or a senior tech walks the roof. We don’t quote from the ground and we don’t quote from a satellite photo. Greg Holloway walks every roof himself before a number is put in writing. If you’re near the Milk District or anywhere else in Orlando, he’s been on your street before, and he’ll tell you what he sees in plain English.
3. 3
   We give you a written price before any work begins. That number includes materials, labor, disposal if needed, and any permit costs. You’ll see it in writing before we open a bundle. No door-at-the-end changes, no add-ons we didn’t discuss.
4. 4
   We make the repair using the right parts. For Owens Corning work, we use OM-match materials where it matters and quality aftermarket parts where it doesn’t. We’ll explain which is which on your job, because the goal is a fix that lasts, not a parts bill that doesn’t help you.
5. 5
   We test and photograph everything. Before we leave, we water-test the repaired area when it’s practical, and we document the work. You get photos of what we found, what we did, and the finished result.
6. 6
   We hand you a written guarantee before we leave. Not mailed later. In your hand, at the end of the job. If the repair fails within the guarantee period, we come back and fix it at no charge under our 365-Day Done Right Promise.

What Owens Corning Roofing Company Costs in Orlando

We believe in telling you the price before we touch the roof, which means you should have real numbers before you pick up the phone. Here’s what Owens Corning work typically runs in the Orlando market, based on the jobs we’ve done across neighborhoods like College Park, Conway, and Winter Park.

• Minor shingle repair (a dozen shingles or fewer, no decking damage): $285 to $550
• Ridge cap replacement (Owens Corning cap shingles, standard roofline): $400 to $800
• Flashing repair or replacement (chimney, wall, or pipe boot): $350 to $900, depending on access and metal type
• Underlayment repair on a low-slope section: $600 to $1,400, depending on the size and whether decking is involved
• Full Owens Corning roof replacement on an average Orlando home: $9,800 to $16,500, depending on square footage, slope, tear-off work, and which Owens Corning line you choose

What moves the price is access, decking condition, and whether we’re matching existing Owens Corning material or replacing a full slope. High roofs, steep pitches, and older Orlando homes with multiple layers of old shingles all cost more because they take more time and more care. The estimate is always free, and the number we give you is the number you’ll pay. Call (850) 303-7235 for an exact quote on your Owens Corning roof.

Why Orlando Homeowners Call Tilehurst Roofing Orlando for Owens Corning Work

We’re part of the Kingswell family of roofing companies, founded in 2000, and we built this location specifically for Orlando homeowners who’ve already been burned by a no-show contractor or a repair that failed within a month. Here’s what that means when you call us about your Owens Corning roof. You get a live person on the phone, every time, day or night. You get a written price before any work starts, always. You get background-checked, uniformed technicians who know Owens Corning systems well enough to spot a ventilation problem that’s causing shingle failure, not just the failed shingle. And if your Owens Corning roof needs something we don’t think is the right long-term move, we’ll tell you. We carry six other major brands, GAF, CertainTeed, IKO, Atlas, Tamko, and Boral, so the recommendation is based on your home, not on what’s in the truck. The Kingswell Way is simple: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, and put the guarantee in writing. Greg Holloway has been doing exactly that long enough to know it’s the only way that holds up in Orlando weather.

FAQs