Tamko Roofing Company Nationwide

Tamko Roofing Company in Orlando: What to Know First

We provide independent Tamko roofing service in Orlando, from targeted repairs to full replacements using Tamko shingles. Most Tamko repair jobs are done the same day, and you’ll have a written price in your hands before any work starts, every time. We’re not affiliated with Tamko, but we know their products well enough to tell you exactly what’s going wrong and what it costs to set right. If you own a Tamko roof in Orlando and something looks off, call (850) 303-7235 and we’ll walk the roof ourselves before we quote a number.

Call (850) 303-7235

How Tamko Products Fail – and How We Fix Them

Tamko makes a solid shingle, but Orlando’s climate has a way of finding every weak point. Here’s what we see most often on Tamko roofs across the city.

• Heritage series granule loss on south-facing slopes. Tamko’s Heritage line is popular in Orlando, but after years of direct Florida sun, the granule coating starts to wear thin faster on slopes that face full afternoon heat. You’ll see granules collecting in gutters and a patchy, lighter color on the shingles. We inspect for exposed asphalt and replace affected shingles before water gets underneath.
• Elite Glass-Seal lifting at the adhesive strip. The self-seal adhesive on Tamko Elite Glass-Seal shingles can release over time in Orlando’s humidity cycles, especially after our summer thunderstorms with high wind. Shingles lift at the leading edge and start flapping. We hand-seal or replace the lifted shingles and check the surrounding rows so a small problem doesn’t turn into a blow-off.
• Proline ridge cap cracking on older installs. Tamko Proline ridge caps sit at the highest point of the roof and take the harshest sun and rain. On roofs we’ve walked near the Milk District, cracked ridge caps are a common culprit for leaks that show up on ceilings first. We replace cracked caps and re-secure the whole ridge line, rather than patching one piece and leaving the next one to fail.
• Storm Guard underlayment water intrusion at penetrations. When Tamko’s Storm Guard underlayment wasn’t sealed properly around vents, pipes, or skylights during the original install, water travels under the shingles and follows the decking down. The shingles look fine but the plywood is soaking through. We find the entry point, repair the flashing, and replace compromised underlayment so the leak actually stops.
• Nail pops along the drip edge on aging Heritage installs. Florida’s temperature swings make decking expand and contract. On Tamko Heritage roofs that are 12 – 15 years old, we often see exposed nails along the drip edge, the metal flashing at the roof’s border, pushed up by movement. Water follows those nail holes. We reseat or replace fasteners and repair the damaged edge.

Our Tamko Roofing Company Process

Here’s how a Tamko job goes with us, from the first call to the final walkaround.

1. 1
   You call, a live person answers. No voicemail, no callback queue. We get the basics: what you’re seeing, where the leak or damage is, and the rough age of the roof.
2. 2
   Greg Holloway walks the roof himself. Before any number is quoted, Greg inspects the full roof, not just the spot you pointed out. He looks for Tamko-specific issues like lifted adhesive strips, granule wear, and ridge cap cracks.
3. 3
   You get a written price before any work starts. We tell you the price before we touch the roof, and we mean it. That written number covers the repair or replacement we agreed on, with no door-knock surprise pricing.
4. 4
   We decide on parts together. Where Tamko materials are available at a reasonable lead time, we use them. Where an existing Tamko line is discontinued or backordered, we recommend a quality equivalent from GAF, Owens Corning, or CertainTeed and tell you exactly why.
5. 5
   The crew does the work and tests it. For leak repairs, we water-test the area before we call it done. For replacements, we check every seam and flashing point before cleanup.
6. 6
   You get the written guarantee before we leave. Every Tamko repair carries a written guarantee, handed to you before the crew pulls away. If it fails inside the guarantee period, we return at no charge under our 365-Day Done Right Promise.

What Tamko Roofing Company Costs in Orlando

Most Tamko roof repairs in Orlando run between $350 and $1,400 depending on what’s failing. A single lifted or cracked shingle repair is typically $350 – $650. A run of damaged ridge cap usually falls between $500 – $900. Repairs involving underlayment replacement, flashing around a chimney or skylight, or decking spots can push past $1,200. A full Tamko shingle roof replacement on an average Orlando home generally lands between $9,500 – $16,500 depending on the roof’s square footage, pitch, number of stories, and how much old material has to come off. We include material options from all seven major manufacturers, so if a Tamko line is backordered or if another product fits your budget and roof condition better, you’ll know the real numbers up front. Call (850) 303-7235 for a free, written Tamko roof estimate in Orlando.

Why Orlando Homeowners Call Tilehurst Roofing Orlando for Tamko Work

Most of the homeowners who call us have already been burned once by a no-show, a price that changed at the door, or a patch job that started leaking again within a month. We built Tilehurst Roofing Orlando as a Kingswell family company specifically for those people. Every repair carries a written guarantee before the crew leaves. A live person answers the phone 24 hours a day, seven days a week, including weekends and evenings when roof leaks have a nasty habit of showing up. Our techs are background-checked and uniformed, and they know how Tamko products fail in this climate, because they’ve repaired and replaced them across Orlando for years. And when a Tamko roof is too far gone for a patch, we can walk you through replacement options from Tamko, GAF, Owens Corning, CertainTeed, IKO, Atlas, or Boral, so the product fits the home, not just what’s on the truck.

FAQs